Version History

Version 4.2.4

• Improved support for operating in the USA (iOS, Android, PC)
  
  Improvements include graphical TFRs, comprehensive VFR charting and airfield information, georeferenced plates, and much more.

Version 4.2.3

• Pilot Notes now have a Translate button for instantly translating them into your language (iOS, Android, PC)
  
  You'll see the button if the pilot note is in a different language to the one in which you're using SkyDemon.
• Obstruction information improved in mountainous regions (iOS, Android, PC)
• Flyable Conditions coverage increased to support the Canary Islands (iOS, Android, PC)
• Merge functionality reintroduced for split flight logs (iOS, Android, PC)

Version 4.2.2

• Flight logs are now presented with a preview map and with better information display (iOS, Android, PC)
  
  When you bring up a flight log, a banner at the top shows a small-scale map of the flight, and its statistics are displayed in an improved format below. This makes it easier to find the log you're looking for when using the Previous and Next buttons.
• SkyDemon is now translated into Polish (iOS, Android)

Version 4.2.1

• Various fixes to issues encountered by some users (iOS, Android, PC)

Version 4.2.0

• Checklists have been introduced for aircraft profiles (iOS, Android)
  
  Checklists can be defined for each aircraft profile, copied between aircraft, and are accessible from the Airfields tab and by tapping your aircraft symbol in flight.
• Pilot Log redesigned, and optional Airspace Above and Minimum Fuel columns added (iOS, Android, PC)
  
  There is now an option to move the frequencies section to a new page. Airspace Above gives you a ceiling to fly below based on the next controlled or dangerous airspace above you, and Minimum Fuel indicates how much fuel you need to have left at each turning point.
• Approach Information and Admin Information screens redesigned to be more clear (iOS, Android, PC)
  
  Density Altitude calculation is now available for more airfields.
• Trip Overview has been introduced for multi-sector trips (iOS, Android, PC)
  
  This new screen is accessible from the Route menu when you have a multi-sector trip planned, and gives totals for distances, times and fuel, as well as helping you to plan fuel stops.

Version 4.1.2

Version 4.1.1

• Various fixes to minor stability issues encountered by a few users (iOS, Android, PC)

Version 4.1.0

• Aircraft creation wizard makes it much easier to create aircraft profiles (iOS, Android)
• When using the Find tool in flight, you can now select Waypoints Ahead to see a list of all waypoints coming up (iOS, Android)
  
  This is really useful when ATC ask you to report by, or route via, a waypoint that you've never heard of and whose spelling is not obvious.
• It is now possible to add reminders that display at or before turning points in your route as you fly (iOS, Android)
• Warnings are now suppressed for danger or restricted areas activated by NOTAM or AUP, when no such activation is known (iOS, Android, PC)
  
  This benefits customers flying in regions where it is commonplace to fly through danger or restricted areas that are not active, and for whom a warning about such areas is undesirable. The warning is only suppressed if NOTAM and AUP data is up-to-date.
• SkyDemon is now translated into Spanish (iOS, Android)
• Callsigns are now shown for other aircraft when connected to a compatible PowerFLARM receiver (iOS, Android, PC)
• The DataCreator application now requires .net 9 to be installed (PC)

Version 4.0.2

• Support added for sending frequencies to Becker AR620x radios via Bluetooth-to-RS232 (iOS, Android)

Version 4.0.1

• Airspaces can now be found in the Find tool when typing only a partial identifier (iOS, Android, PC)
  
  Previously, you had to type the entire identifier to find them. Now you can start typing and a list of all matching airspaces is shown.
• The Aircraft Editor screen has been redesigned to make it easier to navigate and understand (iOS, Android)
• Instruments are better laid out on small screen sizes (iOS, Android)
• The Safetycom frequency is now shown in the PLOG and Radio tab when operating in the UK (iOS, Android, PC)
• Added support for validation of lateral centre of gravity for helicopters (iOS, Android, PC)
  
  If you are using the Helicopter weight and balance model, you must now set minimum and maximum lateral centre of gravity limits in your aircraft profile, otherwise a warning will be displayed stating the aircraft is out of balance.